Need help?Do you have a question about the Bambu Lab X1 and is the answer not in the manual?
General| Build Volume | 256 x 256 x 256 mm |
|---|---|
| Layer Resolution | 0.05 - 0.3 mm |
| Filament Diameter | 1.75 mm |
| Print Speed | Up to 500 mm/s |
| Feeder System | Direct Drive |
| Max. Nozzle Temperature | 300°C |
| Chamber Temperature | Up to 60°C |
| Heated Bed | Yes |
| Camera | Yes |
| Dimensions | 389 x 389 x 457 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | Wi-Fi, USB |
| Supported Materials | PLA, PETG, TPU, ABS, PA, PC |
| Technology | FFF (Fused Filament Fabrication) |
| Display | Touchscreen |
| Power Requirements | 100-240V, 50/60Hz |
| Max. Bed Temperature | 120°C |
To Next Page
