To Next PageTo Next Page
Need help?Do you have a question about the B&D Controll-A-Door R and is the answer not in the manual?
General| Brand | B&D |
|---|---|
| Model | Controll-A-Door R |
| Category | Garage Door Opener |
| Language | English |
Technical details of the opener including dimensions, voltage, current, lamp, and connectivity options.
Ensures the garage door is in good mechanical condition and balanced before installation.
Guidance on the optimal mounting location and environmental suitability for the opener.
Specifies the requirements for a properly earthed, single-phase power connection.
Steps to check door operation, clean guides, and prepare the installation site.
Instructions for securely attaching the weight bar to the bottom of the garage door.
Procedure to secure the door curtain to the drum for safety and alignment.
Detailed steps for mounting the opener unit onto the garage door axle.
How to program the opener to learn the door's movement range and force.
Process for pairing remote controls with the garage door opener receiver.
Verifies the opener reverses correctly upon encountering an obstruction while closing.
Checks if the opener halts the door when resistance is applied during opening.
How to program a remote button to control the courtesy light independently.
Instructions to program the opener to disable remote control operation for security.
How to program a remote button to activate auxiliary devices.
Guide for setting dip-switches on transmitters for multi-user operation.
Procedure for clearing all previously stored remote control codes.
Information on installing an external aerial to improve radio reception range.
Details on connecting wired accessories like safety beams or wall switches.
Information on connecting accessories via the J8 connector for features like alarm systems.
How to enable the automatic door closing feature, requiring safety infra-red beams.
Instructions on using the remote control to open and close the garage door.
How to use the physical button on the opener for operation and exiting modes.
Explanation of the opener's feature to lock the garage door automatically.
Procedure for disengaging the opener to manually operate the garage door.
What to do during a power outage and opener behavior upon power restoration.
Description of the safety beam accessory and its function.
How to enable the automatic door closing feature after a set time.
Step-by-step instructions for replacing the opener's pilot light globe.
Information on the courtesy light's operation and remote control activation.
Using the opener to control external devices via a programmed remote.
How to temporarily disable all remote controls for security.
Information on the indicator for the door's open/closed status.
Recommended monthly checks for the garage door and opener.
Recommendation for annual professional servicing of the opener.
Glossary of terms used within the warranty statement.
