(Smart Pro & Smart Only)
5.0 SMART PHONE CONTROL
BEFORE YOU START
STEP ONE
STEP TWO
Download the B&D App
to your smartphone
STEP FOUR
Ensure limits are
set prior to connecting
to wi
Remove controls cover
& Press repeatedly
LED will turn PURPLE
(HOTSPOT ON)
STEP THREE
Open APP
and click START
!
WARNING!: This device allows for operation of
the door when not in line-of-sight of the door
and opener. The door may operate unexpectedly,
therefore do not allow anything to stay in or near
the path of the door.
till network
LED is lit
HOLD for 5 sec
Go to phone settings,
then WiFi and select
(B&D000000)
The home WiFi router
is within range of
opener
The Smart Phone Control works via your home’s WiFi network.
Initial set up involves linking your phone app and smart
opener to your home network.
Set up new
Smart Hub in app
STEP FIVE
Smart Hub connect
appears, ensure WiFi
network =
(B&D000000)
Network LED and
light will flash.
Press
Follow
instructions in the app
Network LED will turn Blue then
return controls cover
To Next Page
Loading...
