| 89
BEP CZone | Zeus Touch Operator Manual
BEP CZone
The Zeus Touch system integrate with BEP’s CZone system used for controlling and monitor-
ing a distributed power system on your vessel.
A separate manual will be provided with your CZone system. Refer to this documentation and
to the Zeus Touch Installation for how to install and configure the CZone system.
The BEP CZone panel
When the CZone system is connected and configured, the CZone icon will be available on
the Tools panel. This icon gives access to the CZone panel, providing icons for ZCone modes
and system overview.
CZone modes
The CZone modes provide a one press functionality that allows multiple circuits to be con-
trolled efficiently. The modes are configured during installation of the system.
All available modes will be displayed on the CZone panel.
If there are more than 6 modes configured on screen the rest of the modes will move to the
More Modes option.
16
To Next Page
Loading...
Need help?
General
