Need help?Do you have a question about the B&K mc-101 sonata and is the answer not in the manual?
Controls input routing to record output for pure source recording.
Routes input pairs to processing circuitry and pre-amplifier output.
Routes tape deck input to processing circuitry, overriding SELECT.
Connects external processors for additional effects; acts as secondary tape monitor.
Adjusts playback volume level with 32 detent positions.
Selects stereo or monaural reproduction mode for incoming signals.
Selects active processing or passive bypass mode for the signal.
Adjusts relative volume between left and right channels.
Includes or excludes the tone stage, activating Bass/Treble controls.
Attenuates high frequencies above 6 kHz to reduce noise.
Adjusts the bass response, allowing emphasis or de-emphasis.
Adjusts the treble response, allowing emphasis or de-emphasis.
Connects stereo headphones to the output.
Mutes outputs and activates headphone output when OFF.
Switches between MM and MC phono stage configurations.
Instructions for setting capacitive loading for MM/MC cartridges.
Instructions for setting resistive loading for MM/MC cartridges.
To Next Page
General
