B&K PT 3 series II User Manual

PT 3 series II
Preamplifier Tuner
Owner’s Manual
P/N 13010 REV 0005

B&K PT 3 series II Specifications

General

Brand	B&K
Model	PT 3 series II
Category	Amplifier
Language	English

Summary

Safety Precautions

Features

Front Panel

Front Panel Buttons

Provides control over functions like Sleep, Preset, Enter, Save, Source, Loudness, and Level.

Rear Panel

Mono L+R and Sub Preamp Outputs

Variable level outputs for driving amplifiers or powered speakers.

High Pass Outputs

Outputs with high-pass filter for small speakers or subwoofers.

Full Range Preamp Outputs

Variable level output to external amplifiers.

Remote Control

Making the Connection

Using Full Range Speakers

Using Small Speakers

Control Output / IR Input

Control Output

Outputs 12 VDC for controlling external devices like amplifiers or screens.

IR Inputs

Accepts IR signals from repeater systems for remote control.

Operation

POWER ON/OFF

Control unit power using the main switch or standby mode.

SLEEP

Puts the unit in standby mode for remote control operation.

Adjusting Volume

Control master volume level using the volume knob or remote.

Choosing a Source

Select desired audio source from inputs like CD, DVD, or Tuner.

Headphone Mode

Operate unit with CONTROL OUT off, potentially for headphone listening.

Adjusting Balance

Adjust left/right channel balance by decreasing opposite channel level.

Adjusting Bass

Adjust low frequency content in 2 dB increments (+/- 12 dB).

Adjusting Treble

Loudness

Tuner Operation

Presets

Recalling a Preset

Saving a Preset

Menu

The Menu System

Guide to navigating the front panel or remote control menu system.

Setup

Favorite Preset Setup

Source Names Setup

Source Levels Setup

Frequently Asked Questions

Advanced Setup Features

Miscellaneous Setup

Configure max volume level and remote control ID codes.

Power On Titles

Control Out Setup

Security Options

Factory Reset

Troubleshooting

Preamplifier Tuner Specifications