Need help?Do you have a question about the B&K PT3 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.005% |
|---|---|
| Dimensions | 430 x 75 x 260mm |
| Weight | 5.3kg |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio (MM) | 80dB |
| Input Sensitivity | 2.5mV (MM) |
| Type | Phono Preamplifier |
Controls the main power switch and sleep function for daily operation.
Puts the unit in standby mode for quick startup and remote control compatibility.
Adjusts system volume using the front panel knob or remote control.
Selects the desired audio input source for playback.
Enables headphone listening and can control external amplifiers via CONTROL OUT.
Adjusts the left/right channel audio balance.
Adjusts the low-frequency content (bass) of the audio signal.
Adjusts the high-frequency content (treble) of the audio signal.
Enhances clarity and intelligibility at low listening levels.
Allows skipping selected presets when pressing Preset buttons.
Configure maximum volume level and remote control ID codes for multi-zone use.
Set a maximum volume level to protect speakers or limit usage.
Configure B&K product compatibility for remote control in multi-zone systems.
Customize two lines of text displayed on the unit when powered on.
To Next Page
