Need help?Do you have a question about the B&K AV1230 and is the answer not in the manual?
Provides critical warnings regarding electrical hazards, proper handling, ventilation, and avoiding modifications.
Advises on unplugging, power cord care, volume levels, placement, stacking, and connecting to outlets.
Warns about mistaking control connectors for audio/video inputs and exceeding speaker power ratings.
Outlines conditions under which the amplifier should be serviced by qualified personnel.
Covers the DIP switches used for configuring audio signal, mono/stereo, and muting.
Describes the removable phoenix connectors for speaker wire, stable into 4 ohms.
Details connecting speaker wire to Phoenix connectors, up to 12 gauge, for left and right channels.
Explains the 1/8" minijack for remote mute on/off and its voltage compatibility.
Explains the ON switch controls remote Bus and Channel switching for audio mute on/off.
Describes the BUS switch for sourcing audio from the Bus input versus Local audio inputs.
Details the MONO switch for creating a composite mono signal for both amplifier channels.
Explains the SENSE switch for automatic muting after a period of no detected audio signal.
To Next Page
General
