Banner Expert D12 Series User Manual

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: (612) 544-3164 • FAX (612) 544-3213 • E-mail: sensors@baneng.com
D12 Expert Series
WARRANTY: Banner Engineering Corporation warrants its products to be free from
defects for one year. Banner Engineering Corporation will repair or replace, free of charge,
any product of its manufacture found to be defective at the time it is returned to the
factory during the warranty period. This warranty does not cover damage or liability for
the improper application of Banner products. This warranty is in lieu of any other
warranty either expressed or implied.
** Range data is for 2 m (6.5') plastic fiber assemblies.
Plastic Fiber Assembly
Fiber Diameter
Typical Fiber
Model
Maximum Range*
OPPOSED MODE
0.5 mm (.02") bifurcated PBT26U
0.5 mm (.02") individual pair PIT26U 84 mm (3.3")
1.0 mm (.04") individual pair PIT46U 315 mm (12.4")
1.5 mm (.06") individual pair PIT66U 660 mm (26.0")
25 mm (1.0")
1.0 mm (.04") bifurcated PBT46U
DIFFUSE MODE (Based on a 90% reflectance white test card)
1.5 mm (.06") bifurcated PBT66U
0.25 mm (.01") bifurcated PBT16U 3.8 mm (0.15")
190 mm (7.5")1
Sensing Tip
(Dimensions in Inches)
Qty. Required
for Each Unit
95 mm (3.7")
1
1
1
1
M3 x 0.5
11.0 ø 0.5
polyethylene
(.43)
(.02)
nickel plated brass
1
polyethylene
M4 x 0.7
3.0
Fiber
M2.5 x 0.45
(.12)
Diameter
nickel plated brass
11.0
(.43)
0.25 mm (.01") individual pair PIT16U 18 mm (0.7")1
1
2X ø 0.5
polyethylene
M3 x 0.5
11.0
(.43)
(.02)
nickel plated brass
2X ø 0.25
polyethylene
M3 x 0.5
11.0
(.43)
(.010)
stainless steel
14.0
M6 x 0.75
ø 4.0
3.0
(.16)
(.12)
(.55)
polyethylene
nickel plated brass
Fiber
Diameter
M2.5 x 0.45
10.0
ø 0.25
polyethylene
(.39)
(.010)
stainless steel
* Range data is for 2 m (6') plastic fiber assemblies

Banner Expert D12 Series Specifications

General

Brand	Banner
Model	Expert D12 Series
Category	Accessories
Language	English