Banner Registration Mark Sensor R58 Expert User Manual

R58 Expert™
R58 Expert™
Registration Mark
Sensor
• Optimal contrast derived from a
combination of 3 LED colours and 16
levels of grey scale analysis
• Ultra-fast response time of 50 µs
(10 kHz switching frequency) allowing
precise detection and positioning
• Extreme performance stability
resulting from advanced micro-
processor algorithms and virtually no
temperature drift or warm up effect
• Configuration using TEACH button
to teach Static, Dynamic or Manual
Adjustment; optional via remote wire
• Indicator LEDs to show status, DO
or LO and provide 30 ms ON-delay
selection
• 8-Segment bar graph for setup
and signal strength visualisation and
control
• Robust metal housing with standard
positioned mounting holes and two
different output configurations
• Working distance of 10 mm ±3 mm
• Two lens positions (on-axis or right-
angle) and two spot positions (vertical
or horizontal) possible
Automatic detection of
any colour mark

Banner Registration Mark Sensor R58 Expert Specifications

General

Model	R58 Expert
Type	Registration Mark Sensor
Sensing Beam	Visible red LED
Supply Voltage	10-30 V DC
Protection Rating	IP67
Output Type	NPN or PNP
Housing Material	Plastic
Connection Type	M12 Connector

Summary

R58 Expert Registration Mark Sensor

Optimal Contrast and Grey Scale Analysis

Achieve optimal contrast using 3 LED colours and 16 levels of grey scale analysis for precise detection.

Ultra-Fast Response Time

Features a 50 µs response time (10 kHz switching frequency) for precise detection and positioning.

Advanced Performance Stability

Offers extreme stability with advanced micro-processor algorithms and minimal temperature drift.

Flexible Configuration Options

Configure via TEACH button (Static, Dynamic, Manual) or optional remote wire.

Status Indicator LEDs and Delay Selection

Indicator LEDs show status, DO, or LO, with 30 ms ON-delay selection.

8-Segment Bar Graph for Setup

Utilize an 8-segment bar graph for setup, signal strength visualization, and control.

Robust Metal Housing and Output Configurations

Features robust metal housing with standard mounting holes and two output configurations.

Working Distance and Lens Positions

Offers a working distance of 10 mm ±3 mm with selectable lens and spot positions.

Registration Mark Detection Applications

Food Packaging Registration Mark Detection

Detects registration marks on food packaging by automatically selecting the best LED colour for contrast.

Splice Detection in Paper Rolls

Identifies inconspicuous splices in paper rolls to ensure printers skip them.

Tube Registration Mark Detection

Detects registration marks on tubes for accurate positioning before filling processes.