EasyManuals Logo
Home>Banner>Accessories>D10 Series

Banner D10 Series User Manual

Banner D10 Series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Datasheet
Low-cost, 10 to 30 V dc Sensor for use with Plastic Fiber Optics
Models available with visible red (660 nm) or visible green (525 nm) LED light
source
Sleek, ultra-slim 10 mm housing, mounts to standard 35 mm DIN rail
Solid-state, bipolar discrete outputs: one current sourcing (PNP) and one current
sinking (NPN)
High-speed models: 200-microsecond output response
Standard models: 500-microsecond output response plus crosstalk-avoidance
circuitry (for applications with multiple sensors)
Selectable Light/Dark Operate and 40 millisecond pulse stretcher (OFF-delay), via
two easy-to-operate slide switches
12-turn Sensitivity adjustment with relative position indicator
LED status indicators for Power ON and Light Sensed (AID
) indication
Models available with integral cable or Pico-style quick-disconnect
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Red Beam
(660 nm)
Green Beam
(525 nm)
Response Time Cable
1
Output Type
D10AFP D10AFPG 500 microseconds 4-conductor 2 m (6.5 ft) Cable Bipolar NPN/PNP Solid-state
D10AFPQ D10AFPGQ 4-pin Pico-style QD
D10AFPY D10AFPGY 200 microseconds 4-conductor 2 m (6.5 ft) Cable
D10AFPYQ D10AFPGYQ 4-pin Pico-style QD
Features
L O
DO
0 ms
40 ms
+
-
DELAY
Yellow Signal
Strength LED
LED flashes
to indicate received
signal strength
Green
Power ON
LED
12-Turn Sensitivity (Gain)
Control and Indicator
Turn Sensitivity control
clockwise to increase Gain
LO/DO Select
Switch
Delay Selector
Switch
1
To order the 9 m (30 ft) PVC cable model, add the suffix "W/30" to the cabled model number.
For example, D10AFP W/30. Models with a quick disconnect
require a mating cordset.
D10—Discrete Output
Original Document
118431 Rev. B
14 November 2016
118431

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Banner D10 Series and is the answer not in the manual?

Banner D10 Series Specifications

General IconGeneral
BrandBanner
ModelD10 Series
CategoryAccessories
LanguageEnglish

Related product manuals