Banner EZ-SCREEN LP - Cordsets

Overview
EZ-SCREEN LP
Instruction Manual
Components and Specifications
2.3 Cordsets
Machine interface cordsets provide power to the first emitter/
receiver pair. Sensor interconnect cables provide power to
subsequent emitters and receivers in the cascade. Only cordsets
with yellow PVC cable and black overmolds are listed; for
cordsets with black PVC cables and overmolds, add suffix “B” to
the model number (e.g.,
RDLP-815DB).
A removable disconnect (RD) fitting is required to connect
directly to the sensor housing. QD fittings are used for cable-to-
cable interconnections and connections with other devices.
RD to Flying Leads Cordsets
Removable disconnect (RD) connector on one end; unterminated
(cut to length) on other.
Model
Number
Length Wire
Banner Cordset
Color Code
For Emitters and Receivers
Color Function
RDLP-815D
RDLP-825D
RDLP-850D
RDLP-875D
RDLP-8100D
4.6 m (15.1')
8 m (26.2')
15.3 m (50.2')
23 m (75.5')
30.5 m (100.1')
8-conductor
cable,
22 AWG/
0.33 mm²
Bn +24V dc
Or/Bk EDM 2 (Aux)
Or EDM 1
Wh OSSD 2
Bk OSSD 1
Bu 0V dc
Gn/Ye Gnd/Chassis
Vi Reset
RD to Flying Leads Cordsets (E-Stop/Interlock Connections)
Used to connect devices to receiver cascade input RD
connection. Removable disconnect (RD) connector on one end;
unterminated (cut to length) on other. See Figures 7-8, 7-9, and 7-10.
For Cascade Receivers Only
Color
E-Stop
Function
RDLP6G-415D
RDLP6G-425D
RDLP6G-450D
4.6 m (15.1')
8 m (26.2')
15.3 m (50.2')
4-conductor
cable,
22 AWG/
0.33 mm²
Bn Ch 1a
Wh Ch 2a
Bk Ch 1b
Bu Ch 2b
RD to M12/Euro QD Cordsets
Used to interconnect SLPC.. and SLSC.. (standard EZ-SCREEN)
emitters or receivers in a cascade, or for use with a mating M12/
Euro QD cordset, such as QDE.., DEE2R-.., or CSB-.., listed on
page 10). See Section 7.4 for maximum cascade cordset lengths.
Model Length Wire Termination
DELPE-81D
DELPE-83D
DELPE-88D
DELPE-815D
DELPE-825D
DELPE-850D
DELPE-875D
DELPE-8100D
0.3 m (1')
1 m (3.3')
2.5 m (8.2')
4.6 m (15.1')
8 m (26.2')
15.3 m (50.2')
23 m (75.5')
30.5 m (100.1')
8-conductor
cable,
22 AWG/
0.33 mm²
RD-style
removable
disconnect fitting
at one end, male
M12/Euro QD
fitting at the other
RD to RD Cordsets
Used to interconnect multiple SLPC.. emitters or receivers in a
cascade. See Section 7.4 for maximum cordset lengths.
Model Length Wire Termination
DELP-110E
DELP-111E
DELP-113E
DELP-118E
DELP-1115E
DELP-1125E
DELP-1150E
DELP-1175E
DELP-11100E
0.05 m (0.2')
0.3 m (1')
1 m (3.3')
2.5 m (8.2')
4.6 m (15.1')
8 m (26.2')
15.3 m (50.2')
23 m (75.5')
30.5 m (100.1')
11-conductor
cable,
24 AWG/
0.20 mm²
RD-style
removable
disconnect fitting
at each end,
for cascade
connections
between SLPC..
sensors
RD to Female M12/Euro QD and Mating Cordsets
Used to connect E-stop or other devices to sensor input RD
connection. See Figure 7-8.
Model Length Wire Termination
DELPEF-81D
DELPEF-83D
DELPEF-88D
DELPEF-815D
0.3 m (1')
m)
m)
m)
8-conductor
cable,
22 AWG/
0.33 mm²
RD-style fitting at
one end, female
M12/Euro QD
fitting at the other
to connect to
QDE2R4-8..D
cordset below
QDE2R4-815D
QDE2R4-825D
QDE2R4-850D
4.6 m (15')
7.6 m (25')
15.2 m (50')
8-pin
connector,
4-conductor
cable,
22 AWG/
0.33 mm²
Male M12/Euro QD
fitting at one end,
flying leads at the
other to enable
4-wire hookup to
device
Figure 2-3. EZ-SCREEN LP connection options
300 mm 8-pin M12/Euro Pigtail QD
Order mating M12/Euro QD cordset
separately: QDE, DEE2R, or CSB (see
page 10)
RD to RD
Requires DELP cordset to connect 2nd,
3rd, and 4th sensors in a cascade (see
Figure 7.8 for other options)
Integral Removable Disconnect (RD)
Requires RDLP, DELPE, or
DELPEF cordset (for cascading)
Cordset sold separately.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com