Banner EZ-SCREEN LP - Accessory Mounting Brackets


Overview

EZ-SCREEN LP
Instruction Manual

Components and Specifications

Components and Specifications
Accessory Mounting Brackets
See Section 2.5 for standard brackets (included with sensors).
LPA-MBK-13
•Adaptorforside-mountbracketLPA-MBK-12
•Reorientssensorrotationby90° (+10°,�∆0- °)
•14ga(1.9mm)steel,blackzincplated
•Includes1bracketandhardware
LPA-MBK-20
•Universaladapterbracketformountingto
engineered/slotted aluminum framing (e.g.,
80/20
™
, Bosch)
•RetrofitforBannerMS/US/MG;clearanceforM4
and M6 hardware
•UsewithLPA-MBK-11, -12, or -13
•12ga(2.66mm)steel,blackzincplated
•Includes1bracketandhardware
LPA-MBK-22
•End-capbracketformountingsensorinside
Unistrut
®
metal framing; uses end-cap plates
from bracket LPA-MBK-11
•FitsUnistrutP1000size,withM6or1/4"
channel nuts
•14ga(1.90mm)steel,blackzincplated;die-
cast zinc clamps
•Includes2bracketsandhardware
LPA-MBK-21
•Pivoting“L”bracketsystemfortwocascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
•Adjustable90° to 180° orientation; resolution is
25 mm at < 135°, 28 mm at 120°, and 32 mm at
90° configuration. (Resolution between sensors
at the pivot point can be as large as 32 mm.)
•+10°,�∆0- ° sensor rotation
•14ga(1.9mm)steel,blackzincplated
•Cascadebracketsjointwosensors.Eachmodel
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-90
•Fixedangled“L”bracketfortwocascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
•Fixed90° orientation; maintains 25 mm
resolution between sensor pairs
•+10°,�∆0- ° sensor rotation
•14ga(1.9mm)steel,blackzincplated
•Cascadebracketsjointwosensors.Eachmodel
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-120
•Fixedangled“L”bracketfortwocascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
•Fixed120° orientation; maintains 25 mm
resolution between sensor pairs
•+10°,�∆0- ° sensor rotation
•14ga(1.9mm)steel,blackzincplated
•Cascadebracketsjointwosensors.Eachmodel
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-135
•Fixedangled“L”bracketfortwocascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
•Fixed135° orientation; maintains 25 mm
resolution between sensor pairs
•+10°,�∆0- ° sensor rotation
•14ga(1.9mm)steel,blackzincplated
Cascade brackets join two sensors. Each model
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-180
•Fixedinline(straight)bracketfortwocascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
•Fixed180° orientation; maintains 25 mm
resolution between sensor pairs
•+10°,�∆0- ° sensor rotation
•14ga(1.9mm)steel,blackzincplated
•Cascadebracketsjointwosensors.Eachmodel
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-Pxxx
•L-shapedbracketforoneemitterorreceiver
protects sensor from weld flash, impact.
•Sizedtomatchsensorlength;replace“xxx”
in model number with sensor size (e.g., LPA-
MBK-P270 for use with sensor SLP..-270..);
bracket studs mate with side-mount brackets
LPA-MBK-12, included with sensor. Corner
notch accommodates cable routing.
•+10°,�∆0- ° sensor rotation
•12ga(2.66mm)steel,blackzincplatedor
painted
•Onebracketandhardware.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com