Banner L-GAGE LE250 - Quick Menu

Quick Menu
The sensor includes a Quick Menu with easy access to view and change the analog and discrete output switch points.
Access the Quick Menu by pressing Down or Up from Run mode. When in the Quick Menu, the current distance
measurement displays on the first line and the menu name and the analog value alternate on the second line of the
display. Press Enter
to access the switch points. Press Down or Up to change the switch point to the desired
value. Press Enter to save the new value and return to the Quick Menu.
Quick Menu
4mA Pt (value)
MENU
20mA Pt (value)
SPt1 (value)
SPt2 (value)
access Sensor
Menu (Top Menu)
Run
Mode
Spt2 not available unless in
Window Mode
set value with
or
Save setting
and return to
Quick Menu
Cancel and
return to
Quick Menu
Figure 13. Quick Menu Map (Window Mode)
L-GAGE
®
LE250/550 Analog-Discrete Laser Sensors
P/N 175093 Rev. E www.bannerengineering.com - Tel: +1-763-544-3164 5