© 2012 – Banshee Helicopters GmbH Page 31
9. Video tutorials and Links
Please consider the following video tutorials:
How to attach the canopy:
https://www.youtube.com/watch?v=5LXARH4CeTI
Further informations for the assembly:
https://www.youtube.com/watch?v=VGP0vQUoilA
Fastening of the motorbelt:
https://www.youtube.com/watch?v=Tbm9zoKnGKE
Belt tension for all high power setups:
http://www.youtube.com/watch?v=aP98_GAIjC4
Canopy decal application:
http://www.youtube.com/watch?v=fbqcSvfCyik
Tips for the maiden flight:
http://www.banshee-helicopters.de/index.php/forum/22-assembly/419-maiden-flight
10. Important safety information
It is indispensable that you check all important screwings before you fly the helicopter
for the first time and again after several flights since screws or bolts may come loose
despite careful assembly. Be sure to double-check in any case. If nothing has come
loose after several flights, the screws will usually keep permanently tight. We do not
assume any liability in case a screwing comes loose. The maximum permissible
speed of Banshee 700 is 2300 RPM. Higher velocity may exceed the necessary
safety margin, since many factors (e.g. blade weight) have an impact on it. In addi-
tion, we think that a rotation speed exceeding 2300 RPM does not make sense for
this helicopter model.
Remote control helicopters pose a substantial risk. Do not consider it a toy. Please
act with caution when operating, assembling or performing maintenance. Do not op-
erate the helicopter within the vicinity of people, animals, buildings or cars.
Be aware that any component may break down at any time and you may lose control
of the helicopter. Only use original parts for replacement. Pilots are responsible for
safe operation. We do not assume any liability for damage or secondary damage that
is caused by helicopters or components we distribute.
To Previous Page
Loading...