Baofeng RD-5R - Frequency Configuration; Rx;Tx Frequency and Step Settings

Level 1 men
Set
Level 2 menu
Radio Cfg
Level 3 menu
Ch
Options
Name
Description of settings
Sets reception frequency; press * to clear all digits,
press EXIT to delete digits one by one
Sets transmit frequency; press to clear all digits,
press EXIT to delete digits one by one
To set channel name; press * to clear all, press EXIT to delete
one letter at a time
Options: 0—15optional
Valid for digital mode only
Options: 1—2optional
Valid for digital mode only
000000—50000K, the minimum step value is 5()K
Sets the difference between transmit frequency and receive
frequency in frequency mode. This setting is only active if
Shift Dir is set to positive or negative
Options: Off / Positive / Negative
Off: Transmission frequency and reception frequency have
no difference in frequency mode
Positive: In frequency mode, the transmission frequency is
equal to the reception frequency plus the difference frequency
Negative: In frequency mode, the transmission frequency
is equal to the reception frequency minus the difference
frequency
Options: 2.5K/5.OK/6.25K/10K/12.5K/25K/50K
In the frequency mode, press [A] / [V]to adjust the
frequency value in steps; scanning steps in frequency mode
Remark
For digital
mode only
Color code
sot
Shift Freq
Shift Dir
Freq Step