Do you have a question about the Baofeng RD-5R and is the answer not in the manual?
Frequency Range | 136-174 MHz, 400-480 MHz |
---|---|
Power Output | 5W |
Battery Capacity | 1800mAh |
Channel Capacity | 128 |
Dimensions | 110 x 58 x 32 mm |
Operating Voltage | 7.4V |
Modulation Type | FM |
DMR Tier | Tier I & II |
Display | LCD |
Waterproof | No |
Channel Spacing | 12.5 kHz, 25 kHz |
Weight | 220g (with battery and antenna) |
States the company's position regarding accuracy and liability.
Welcomes users and introduces the RD-5R radio's features.
Identifies and labels all physical controls and parts of the radio.
Explains the functions of standard buttons on the radio.
Describes the customizable functions for side buttons (SK1, SK2).
Explains the meaning of various icons displayed on the LCD screen.
Guides users through navigating the radio's menu structure.
Managing contacts, contact list, and adding new contacts.
Handling inbox, outbox, drafts, and preset messages.
Reviewing and managing dialed, answered, and missed calls.
Configuring CTCSS/DCS, squelch, TX power, and busy lock.
Configuring TOT, VOX, and double wait functions.
Managing keypad lock, password, backlight, and screen modes.
Configuring language, ANI, DTMF, and PTT ID.
Viewing Radio ID, model, serial number, and software versions.
Setting reception/transmission frequencies, bands, and steps.
Selecting channel types, managing zones, and scan lists.
Using Pinyin, English, and number input for text.
Turning on/off, volume, VFO mode, and zone selection.
Initiating and managing single calls.
Initiating and managing group and all calls.
Switching between modes and using DTMF signaling.
Using Time-out Timer and Busy Channel Lockout.
Managing contacts and sending/receiving messages.
Detailed guide for inbox, outbox, and drafts.
Using scan functions and setting priority channels.
Adjusting monitor function and squelch level.
Viewing radio info and configuring CTCSS/DCS.
Procedures for updating firmware and initializing defaults.