Functions and Operation
Standby Interface
This feature allows you to quickly return to the previous menu
or standby interface.
In the editing interface, press the [EXIT] button to exit the
editing interface, and return to the previous menu. Press the
[BAND] button in any menu interface to return directly to the
standby interface
Manage Contacts
You can manage your contacts through the "Contacts" menu of
this product.
Contact List
The contact list is used to save contact information and can
store up to 256 records. You can access the "Contact list" from
the "Contacts" menu, or press the [Contact list] shortcut to
quickly access the "Contact list"
Extended Functions
You can do the following for a contact in the contact list (single
call contacts only): call prompt, radio detection, remote monitor,
radio activation, or radio Inhibit. See the "Manual Dialing"
section below.
Edit Contact
You can modify the number and alias of a contact (single call
contacts only) in the contact list.
View Contact
You can view the contact details.
Delete Contact
You can delete a contact (single call contacts only) in the
contact list. The contact list must have at least two records, and
you can't delete the default contact for the current channel.
New Contact
This menu allows you to create a new contact (single call
contacts only) to the contact list. The alias and number of all
contacts must be unique, and the range of entered contact
number is 1-16776415.
Note:
When entering a contact alias, you can press the button
to toggle the input method.
In addition to creating contacts through this menu, you can
also save numbers in the call log to the contact list.
Manual Dialing
In the digital mode, press the "*"button to enter manual dialing,
then you can manually enter a single call number, and press
PTT to transmit; you can also enter a single call number, and
press the [Menu] button to perform operations such as call
prompt, radio detection, remote monitor, radio activation, and
radio inhibit.
SMS
This product supports DMR data function, and allows sending
and receiving messages; the maximum length of each message
is 144 characters.
To Next Page
Loading...
