Baofeng RD-5R - Scanning and Call Logs; Scanning Functions

Drafts
This product will save the edited messages in the drafts and
support up to 20 draft messages. When the Drafts are full, if a
new message is saved to the drafts, the earliest messages will
be overwritten automatically.
You can perform the following operation for any message in the
drafts: Send, edit, and delete
When you send the message in the drafts, this product will
save this message to the Outbox and delete it from the drafts.
If you want to delete all messages in the drafts, select "SMS
Drafts
Call Log
This product can store up to 10 recently dialed / answered/
missed calls. When the call log is full, the earliest record is
automatically overwritten if there is a new call log.
Operation method: You can enter the "Call log" menu via the
[MENU] button, path: "Call log"; you can also quickly enter this
menu via the [Call log] shortcut.
You can perform the following operation for any call log in the
list:
Press [PTT] to initiate a call, add to contact list, and delete.
To delete all dialed / answered / missed call logs, select
"Call Log ->Dialed / Answered/ Missed Calls -> Delete All".
Scanning
The scanning function helps you listen to the communication
activity on other channels and comprehend the current activity
of the relevant team members
NOTE: The scanning function must be used when dual waiting
is disabled.
Method of operation
You can select to turn on scanning through the "Scan" menu.
Or press the [*] buttonin the standby interface to turn on
scanning. Or if the "Auto Scan" feature is enabled for a channel,
the two-way radio will automatically turn on scanning when
switching to that channel.
After the scan is turned on, the two-way radiowill scan
according to the scan list set on the channel where the scan is
on. The scanning process is as follows:
z
»When scanning, the icon is displayed on the screen, and
the LED flashes slowly in orange.
»When activity is scanned on a channel, the two-way radio will
stay on the channel. If the scan stays on a non-priority channel,
z.
the icon
is displayed on the screen. If the radio stays on
Z Z: is displayed.
priority channel 1 or 2, the icon
If you do not need to listen to the activities on the channel, press
the [Delete useless channel] shortcut to temporarily delete the
channel when scanning stops.
If you want to continue to listen to the activities on the channel,
press the [MONI] shortcut while scanning stops.
To exit scanning, press the [*] button again, or choose to turn off
scanning in the "Scan" menu.
Scan Settings
You can ask the dealer to create a scan list for each channel.
This product can add up to 16 scan lists. Each scan list contains