O Select through the programming button: If the dealer has set
the [Zone switch] shortcut, you can press the shortcut to switch
to the desired Zone.
Selecting Channel, User ID & Call Group ID
Press [VFO/MR] to switch to MR (channel) mode, and press
[ A ] / [ V ] to select the desired channel, user alias or ID, or
call group alias or ID.
Setting Frequency Manually
In the standby interface, press [VFO/MR] to switch to VFO
(frequency) mode, in which you can perform operations such as
inputting frequency manually and saving channels.
VFO Mode
VFO mode is the basic mode for changing the operating frequen-
cy. In the standby interface, press [VFO/MR] to switch to VFO
mode, and press [A]/ [V] to increase or decrease the frequency.
Quick Frequency Input
VFO mode is the basic mode for changing the operating
frequency. In the standby interface, press [VFO/MR] to switch to
VFO mode, and press [ A [ V ] to increase or decrease the
frequency.
O Press [VFO/MR] to switch to VFO mode.
• The frequency must be entered directly in VFO mode.
Press the number buttons to [9]) to enter the desired
frequency.
After entering the frequency manually, press and hold the
[PTT] button to call the contact of current frequency.
Digital - Analog Switching
Each channel of this product can be configured by the dealer as
an analog channel or a digital channel. If the current region
contains a digital channel and an analog channel, you can
change the channel to an analog or digital.
Dual Mode Switch
Press [A/B] to switch the upper and lower pointers, and the solid
pointer points to the main channel.
Dual-stage operation mode can be selected through the menu;
the path is as follows:
Enter "Menu -> Set ->Radio Set -> Double Wait" (Off / On).
When dual standby is "off', the machine operates in
dual-stage single waiting mode. The machine only works on the
channel or frequency indicated by the adjacent solid pointer, and
the sub channel does not receive signal.
When "Double Wait" is selected as on, the main channel and
sub channel scan in turn. When a signal is received by one
channel or frequency, the radio locks on to and receives that
channel or frequency. If the signal is not on the main channel,
To Next Page
Loading...
