DCS ‘DCS’ activated.
+ - Frequency offset direction for accessing repeaters.
S Dual Watch/Dual Reception functions activated.
VOX Function ‘VOX’ enabled.
R Reverse function activated.
N Wide Band selected.
Battery Level indicator
Keypad lock function activated.
L Low transmit power.
▲▼ Operation frequency.
Signal Strength Level.
10.- 1750 Hz TONE FOR ACCESS TO REPEATERS:
The user needs to establish long distance communications through an amateur radio repeater
which is activated after receiving a 1750 Hz tone. Press and hold on the 【PTT】,then press the
【BAND】button to transmit a 1750Hz tone.
11.- BASIC OPERATION:
11.1.-RADIO ON-OFF/VOLUME CONTROL :
-Make sure the antenna and battery are installed correctly and the battery charged.
-Rotate the knob clockwise to turn the radio on, and rotate the knob fully counter-clockwise until a
‘click’ is heard to turn the radio off. Turn the knob clockwise to increase the volume, or
counter-clockwise to decrease the volume.
11.2.- SELECTING A FREQUENCY OR CHANNEL:
-Press the key 【▲】or【▼】to select the desired frequency/channel you want. The display shows
the frequency / channel selected.
-Press and hold down the key 【▲】or 【▼】for frequency up or down fast.
Note:
- You can not select a channel if not previously stored.
12-ADVANCED OPERATION:
You can program your transceiver operating in the setup menu to suit your needs or preferences.
12.1.-SET MENU DESCRIPTION:
To Next Page
Loading...
