Baofeng UV-9G - Page 40

37
17
S-CODE - Signal Code
MENU+17
1,…,15
18
SC-REV - Scanner
Resume Method
MENU+18
TO : Time Operation - scanning will resume after
a fixed time has
passed
CO : Carrier Operation -scanning will resume
after the signal disappears
SE : Search Operation -scanning will not resume
19
PTT-ID - PTT-ID
MENU+19
OFF: No ID is sent
BOT: The selected S-CODE is sent at the
beginning
EOT: The selected S-CODE is sent at the ending
BOTH : The selected S-CODE is sent at the
beginning and ending
20
PTT-LT – PTT ID delay
MENU+20
0,1,2…,50ms
*PTT-ID Delay (milliseconds)
21
MDF-A - Channel A
Display Mode
MENU+21
FREQ: Displays programmed Frequency
CH: Displays the channel number
NAME: Displays the channel name
*Note: Names must be entered using software.
22
MDF-B - Channel B
Display Mode
MENU+22
FREQ: Displays programmed Frequency
CH: Displays the channel number
NAME: Displays the channel name
*Note: Names must be entered using software.