Baofeng UV-9G - Appendix D: GMRS Frequency Chart

38
23
BCL – Busy Channel
Lock-out
MENU+23
OFF ON
*Disables the [PTT] button on a channel that is
already in use. The transceiver will sound a
beep tone and will not transmit if the [PTT]
button is pressed when a channel is already in
use.
24
AUTOLK –Automatic
Keypad Lock
MENU+24
OFF ON
*When ON, the keypad will be locked if not
used in 8 seconds. Pressing the [# ] key for 2
seconds will unlock the keypad.
25
SFT-D – Frequency
Offset Direction
MENU+25
OFF: TX = RX (simplex)
+: TX will be shifted higher in frequency than RX
- : TX will be shifted lower in frequency than RX
26
OFFSET -Frequency shift
amount
MENU+26
00.000…69.990
*Specifies the difference between the TX and
RX frequencies
27
MEM-CH - Store a
Memory Channel
MENU+27
000…127
*This menu is used to either create new or
modify existing channels (0 through 127) so
that they can be accessed from
MR/Channel Mode
28
DEL-CH - Delete a
memory channel
MENU+28
000…127
*This menu is used to delete the programmed
information from the specified channel (0
through 127) so that it can either be
programmed again or be left empty.