Baofeng UV3R - Page 12

5)Press [ MENU/LOCK ] or [ PTT] , EXIT to
normal operation.
NOTE:
Grade 7-9: the Most Sensitive VOX Gain Level-
Set under silent conditions.
Grade 4-6: the Medium Sensitive VOX Gain
Level—Set under common conditions.
Grade1-3: the Least Sensitive VOX Gain Level-
Set under too much noise conditions.
When VOX function is activated, the LCD will
display the ICON 'VOX'.
POWER (HIGH/LOW RF OUTPUT
POWER SELECTION)
Select the High/Low RF Output Power, please set
according to the following instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [7]: POWER
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to set: HIGH/LOW
4)Press [ U/V] key to save the setting.
5)Press [ MENU/LOCK ] or [ PTT] , EXIT to
normal operation.
When set the LOW output power, the LCD will
display the ICON [ LOW] , and not display the
ICON [ HIGH ] , when set the HIGH output power.
19
DW (DUAL WATCH FEATURE)
The transceiver's Scanning features include a two-
channel scanning capability, which allows you to
operate between UHF channel and VHF channel
in the VFO mode, while periodically checking a
user-defined channel for activity. If one channel
is received the signal, the scanner will pause on
that channel.
Please activate the DW feature according to the
following instructions:
1)Press [ MENU/LOCK ] , rotate the [DIAL]
knob, come to MENU [8]: DW
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL] knob to set:OFF (disables the Dual
Watch feature)/ON (activates the Dual Watch feature)
4)Press [ U/V] key to save the setting.
5)Press [ MENU/LOCK] or [PTT] , EXIT to
normal operation.
20