Baofeng UV3R - Page 11

Key: Illuminates the LCD when any key pressed.
ON: Illuminates the LCD continuously.
OFF: Disables the LCD lamp.
Here is the procedure for setting up the Lamp
mode:
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [4]: LIGHT.
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of bn
{ DIAL } knob to set ON/OFF/KEy
4)Press [ U/V] key to save the setting.
5)Press [ MENU/LOCK ] or [PTT] , EXIT to
normal operation.
KTONE (KEYPAD BEEPER ON/OFF)
If the Keypad Beeper will inconvenience you
(especially being operated in the silent room), you
may disable the Beeper according to the following
instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [5]: K TONE
2)Then press [ U/V ] key to enter the set mode.
17
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to set ON/OFF
4)Press [ U/V] key to save the setting.
5)Press [ MENU/LOCK ] orPTT] , EXIT to
normal operation.
(ON-The beeper being activated, LCD displays
icon. OFF-The beeper being disabled.)
VOX(VOICE OPERATED TRANSMISSION)
VOX eliminates the necessity of manually switching
to the transmission Mode each time you want to
transmit. The transceiver automatically switches
to transmission mode when the VOX circuitry
senses that you have begun speaking into the
microphone. Please set according to the following
instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL }
knob, come to MENU [6]: VOX
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
{ DIAL ] knob to set:OFF/1/2/3/4/5/6/7/8/9
4)Press [ U/V] key to save the setting.
18