Barco 800 Series - User Interface and Control; Menu-Driven Control System; Infrared Remote Control Unit

Convenient, wel. -
organized on - scree,
menus (available if
several languages,
combined with the usel
friendly infrared remote
control unit, simplifies all
adjustments of the
BARCOGRAPHiCS 800
and the %ARCODATA
800, even for first-iimr
and non-skilied users
... .. . ...
'I, + .,,. .r,i* ::,,.A,"?:.,:.-.: , ...,.. '. .. -.-I: .
j . .'
I
..
. .. ..
. ..
.
..
..
..
.. .
..
.. ,
I' ....
... .
..
..
MENU - DRIVEN CONTROL
UNEQUALLED USER - FRIENDLINESS
For easy geometry and
convergence adjustment, the
BARCO 800 projectors combine
a user - friendly remote control unit
with
logical on - screen menus.
The projectors offer a guided
adjustment program
for first - time
or non - skilled users, and a
random adjustment mode for
more efficient alignment of image
parameters
by experienced
users.
Image adjustments may be
accomplished 'on source', or
through the use of an internally
generated pattern, genlocked on
the connected source or to a pre-
programmed frequency, to allow
for adjustment of the projector in
the absence of an external source.
All image adjustments are
individually set for each source
and
stored in one of the
projector's 38 frequency related
memory banks. Once image
parameters are designated for
each source, the BARCO 800
projectors will automatically select
the correct settings for the source
in use, giving you a perfect
picture.
Once parameters
are selected for
at least two sources, the LDI
(Linear Digital Interpolation)
feature of the BARCO 800
projectors will automatically
calculate the image
parameters of
all additional sources by
comparing them
to previously set
sources, to approximate all new
source settings.
r
1