Need help?Do you have a question about the Barco MSWU-81E and is the answer not in the manual?
General| Model | MSWU-81E |
|---|---|
| Light Source | Laser Phosphor |
| Technology | DLP |
| Resolution | 1920 x 1200 |
| Brightness | 8000 ANSI Lumens |
| Light Source Life | 20000 hours |
| Inputs | HDMI, DisplayPort, VGA |
General safety guidelines and warnings to prevent personal injury and projector damage. Adherence to instructions is critical.
General safety guidelines, warnings, and instructions for operating and installing the projector.
Alerts users to hazards from UV radiation, mercury vapor, and fire risks, with precautions.
Instructions on servicing, explosion hazards, and battery safety and disposal.
Detailed safety protocols covering electrical shock, personal injury, fire hazards, and projector damage prevention.
Detailed safety protocols covering electrical shock, personal injury, and lamp handling.
Advice on preventing projector damage through proper ventilation and maintenance.
Specifies ambient temperature, humidity, altitude, and clean air requirements for safe projector operation.
Specifies ambient conditions, cooling, and clean air requirements for safe projector operation.
Provides a step-by-step guide to the quick setup process for table mount front projection.
Detailed steps for powering on, standby, and safely powering off the projector, including cooling.
Instructions on how to power on, switch to standby, and safely power off the projector, including cooling procedures.
Provides an overview of image settings like Contrast, Brightness, etc.
Explains how to adjust contrast and brightness for optimal picture quality.
Details adjusting sharpness, noise reduction, and color temperature.
Details the various aspect ratio settings and their effect on image display.
Explains adjusting screen orientation for front, rear, and ceiling projection.
Details how to configure the projector for different projection modes like front, rear, and ceiling installations.
Covers lamp replacement, filter replacement, and cleaning procedures for projector upkeep.
Detailed, step-by-step instructions for safely replacing the projector lamp module.
Offers solutions for common projector problems like power, image, and remote control issues.
Offers solutions for common projector problems like power, image, and remote control issues.
Lists compatible lenses and provides instructions on how to install them onto the projector.
Explains how to adjust lens focus, zoom, and perform lens shifts using the control interface.
Provides instructions on connecting the projector to the power source, including safety precautions.
Guides on aligning the projector using adjustable feet for a rectangular and level image.
Instructions on mounting the projector using a ceiling mount, including tools and hardware.
Identifies and describes components on the front and rear of the projector, including controls.
Explains the various input and communication ports available for projector connectivity.
Guides on connecting devices via HDMI and using the 12V trigger for automated screen operation.
Presents an overview of the input menu and guides on selecting input sources.
Guides on configuring color space and input locking for sync stability.
Lists functions in the lamp menu, including mode, status, and run time.
Explains lamp modes and their impact on brightness and lifecycle.
To Next Page
