8.4 Sharpness
The adjustment of sharpness primarily changes the value of high frequency detail. You can connect the projector to an
external image source to display an image resembling the one shown below to adjust the image sharpness.
The following image illustrates the results of direct sharpness adjustment using a random image:
Reduced sharpness
Enhancedsharpness
Original image
8.5 Noise Reduction
Use to adjust the noise of the projected image. This function is suitable for the elimination of image noise from
interleaving SD input.Generally speaking, reducing image noise will lower the value of high frequency detail and make the
image appear more mellow.
→
noise reduction
8.6 Color Temperature
You can choose from 3200K, 5400K, 6500K, 9300K and Native.
Color temperature refers to the change in light color under different energies that is perceived by the naked eye.The change of
color temperature from low to high for visible light goes from orange red white blue
The projector’s default color temperature is set at 6500K and it is suitable for most situations.As color temperature rises, the
image will appear to be more blue; as it decreases, the image will appear redder.When you choose “Native”, the projector
will disable the white adjustment function of the input device.
To Next Page
Loading...
Need help?
General
