Barco ClickShare CX-20 Gen2 User Manual

29R5900114 /01 ClickShare CX-20 Gen2
Image 2–33
3. Click Connect.
Your will be automatically connected to meeting’s room Base Unit.
Note: You may be asked to type in the pincode when multiple people walk in and connect at the same
time.
Whenever the microphone is in use by ClickShare PresentSense, this is clearly visible in the Windows
system tray. By hovering over the microphone icon, you can see which app is using the microphone.
Image 2–34
Walk in without PresentSense active on your desktop app
1. Walk in a meeting room that is sending out the ClickShare PresetSense signal and start sharing content.
A popup message will be displayed to allow access to your microphone.
Image 2–35
You have now 2 choices:
• Allow: allow to access your microphone and the ClickShare PresetSense function will be enabled when
stop sharing. By a next walk in the connection with the Base Unit will done automatically.
• Maybe later: the PresentSense function will not be activated. Next time the popup will be displayed
again.
2. Make your choice and click on the corresponding button.
Getting started

Barco ClickShare CX-20 Gen2 Specifications

General

Resolution	Up to 4K UHD (3840x2160) @ 30Hz
HDMI CEC	Yes
Wireless Technology	IEEE 802.11 a/b/g/n/ac
Video Outputs	HDMI
Audio	Via HDMI
Operating System Compatibility	Windows, macOS, Chrome OS, Android, iOS
Security	WPA2
Video input	HDMI
USB	USB-C
Ethernet	10/100/1000 Mbps
Local view	Available
Network connection	Wi-Fi, Ethernet
Wireless presentation	Yes
Maximum resolution	4K UHD (3840 x 2160)
Operating temperature	0°C to +40°C (+32°F to +104°F)
Storage temperature	-20°C to 60°C