Barco ClickShare CX-20 Gen2 User Manual

R5900114 /01 ClickShare CX-20 Gen214
2.1 Activating the Base Unit
About power mode
The Base Unit is powered via an external power adapter. Once connected, the Base Unit is automatically
switched in standby mode. For more information about power connection, see CX-20 Gen2's installation
manual.
Standby button
1. Push the button shortly.
Image 2–1
When the Base Unit was on, it goes to standby.
When the Base Unit was in standby, it starts up.
2.2 Basic Use, with Button
Basic functionality
When entering a meeting room equipped with ClickShare and if the display is not in screensaver mode, the
ClickShare wallpaper is shown on the display. The content of the wallpaper depends on the setup. Connected
peripherals to the Base Unit and their status are indicated on the wallpaper.
Starting to use ClickShare is now very simple.
To start using CX-20 Gen2 with a Button
1. Take a Button and insert the Button into a USB port of your laptop. Depending on the USB port on your
laptop a convertor must be used. This convertor is not delivered by Barco.
Image 2–2
In the meantime
Getting started

Barco ClickShare CX-20 Gen2 Specifications

General

Resolution	Up to 4K UHD (3840x2160) @ 30Hz
HDMI CEC	Yes
Wireless Technology	IEEE 802.11 a/b/g/n/ac
Video Outputs	HDMI
Audio	Via HDMI
Operating System Compatibility	Windows, macOS, Chrome OS, Android, iOS
Security	WPA2
Video input	HDMI
USB	USB-C
Ethernet	10/100/1000 Mbps
Local view	Available
Network connection	Wi-Fi, Ethernet
Wireless presentation	Yes
Maximum resolution	4K UHD (3840 x 2160)
Operating temperature	0°C to +40°C (+32°F to +104°F)
Storage temperature	-20°C to 60°C