R5900114 /01 ClickShare CX-20 Gen28
1.1 Versions of the product
Regional versions
Depending on the location where you buy the CX-20 Gen2 product, the Base Unit and accessories are
regionalized. By the time of release of this manual, 6 regional versions of CX-20 Gen2 are available: EU, CN,
NA, US, ZH, RW.
The regional version of your CX-20 Gen2 cannot be changed. That means that you cannot use it in
another region.
For more information on the regional variants, refer to the CX-20 Gen2 installation manual.
Link between Barco product brand name and the model group
CX-20 Gen2 is a Barco product of the model group C3010S.
1.2 About the CX-20 Gen2
CX-20 Gen2 sets
With the Conferencing Button, in seconds, you are automatically connected to cameras, mics, soundbars and
any other AV peripherals in the room for a better, more immersive meeting experience. Everything becomes
part of your laptop.
This CX-20 Gen2 not only helps the presenter get the presentation on-screen in a second, but it also allows
the other people in the conference to participate more actively. The result is enhanced meeting efficiency and
better decision-making.
The set is compatible with any laptop, desktop tablet or smartphone OS. It works with most conferencing
platforms and connects instantly with most brands of peripherals (speakers, microphones, webcams,
soundbars) when using the Conferencing Button.
At the moment 6 different sets are available on the market. Each set is sold in its specific region and it can only
be used in that specific region because of WiFi regulations.
Components CX-20 Gen2 set
A standard CX-20 Gen2 set consists of a Base Unit and 2 Conferencing Buttons. Depending on the location
where you buy the product, the software of the Base Unit is different. If needed, you can buy additional
Conferencing Buttons and a tray to store the Buttons.
Image 1–1
1 Base Unit
2 Conferencing Button
1
CX-20 Gen2 Introduction
1. Futher called Button
To Next Page
Loading...
Need help?
General
