16. System Function — In this group of buttons you can find system functions to control screens and layouts or
other menu items
17. Direct Select — These functions have direct access to functions commonly used when programming
presentation switchers.
18. Syntax Function — The functions in this group allow for combined shortcuts in programming via a syntax. One
simple function is to recall Presets created previously. The syntaxt for this can be:
Pre-set 1 ENTER
Will recall preset number 1 into Preview.
To record Presets from Preview the Save PVW button is pressed, thus activating the Save from Preview mode.
Syntax:
Pre-set ENTER
Will then save the current selected Destinations and layers into the next available Preset number.
19. Num Pad — Is used to enter numerical values in the programming syntax.
20. Contextual Display Buttons — These provide mapping of a variety of functions from the EMTS and change
depending on the function.
21. T-Bar — Manually transitions Preview to Program.
22. Trackball with Encoder ring — The track ball can serve as a pointing device as well as a Layer adjustment tool
23. Rotary encoders “Wheels” — Are used to adjust values of selected function like Layer Hpos, Vpos and Size.
LEDs
Green indicate deleted in Preview
To Next Page
Loading...
