601–0445 /05 Loki 75
The 16:9 to center functionality explained.
When a 16:9 content is projected on a Cinemascope screen, the lower and upper part of the picture will go
outside the screen. (Overshoot).. When 16:9 to center function is enabled, the picture will downsize to fit the
height of the screen. Therefore, in order to keep the aspect ratio, the image will not exploit the entire screen
width.
How to enter the 16: to center function
Home/Image/16:9 to center
Image 7-4
Select this function by entering the menu path shown above.
Enter the slider switch to enable. The menu will show the status of the function, On of Off.
Advanced picture adjustments
To Next Page
Loading...
Need help?
General
