63
process measurement and control
equipment
IEC 61000-4-4 Electrically fast transients for
industrial process measurement
and control equipment
IEC 61000-4-5 Surge requirements
IEC 61000-4-11 Voltage variations/dips/interrupts
IEC 61000-4-6 Conducted immunity
IEC 61000-4-8 Magnetic field immunity
Conformance to the Medical
Device Directive 93/42/EEC
EN 60601-1 Medical Part 1 General requirements for safety
Electrical Equipment.
U.S. FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause
harmful interference to radio communications.
To Next Page
Loading...
Need help?
General