Projector Set Up
R5975819.05 BARCO CINE 6 21112002 ____________________________________________________________________________ 5-1
PROJECTOR SET UP
Projector Set Up
The software takes care of the set up of the projector.
• Projector address
• Power up
• Baud rate (9600)
• Password (strap is provided to disable)
Password mode
With strap J5 on the controller unit, the important projector adjustments can be protected with a password. When the password
feature is enabled (strap mounted), the customer has to enter a password before he can enter the specific adjustment.
When the password menus are disabled (strap is open), all adjustments are free. This position of the strap is useful for
qualified service technicians because they do not need a password during service.
Position of the strap (to gain access to the strap, see 'Access to Controls') :
5
To Next Page
Loading...
