Barco UDM W30 - Flight Case and Rigging Frame

To Next Page

To Previous Page

77R5911438 /09 UDM

6.1 Flight case ...................................................................................................................................78

6.2 Rigging frame...............................................................................................................................79

About flight case and rigging frame

The projector can also be delivered with rigging frame installed inside a flight case.

Flight case and

rigging frame

Main Page

Table of Contents5
Safety Information7
General Considerations8
Important Safety Instructions10
Product Safety Labels14
High Brightness Precautions: Hazard Distance15
HD for Fully Enclosed Projection Systems17
HD in Function of Modifying Optics18
Radio Equipment (Optional)19
Compliance20
Download Product Manual21
Installation Process23
Preparation Process24
Installation Process25
Additional Install Options27
Prepare to Install29
Installation Requirements30
Unpacking the Projector32
Initial Inspection34
Projector Orientations35
Projector Positioning37
Projector Shift and Tilt Range38
Lens Selection40
Available Lenses41
Download Projector Toolset43
Installation Procedures45
Pulse RCU, Battery Installation46
Connecting the Projector with the Power Net48
Displaying and Programming Addresses into the RCU49
Using the XLR Connector of the RCU50
Setting the Projector Addresses51
Alignment of a Table Mounted Projector52
Alignment of Projector in the Rigging Frame53
Wall or Ceiling Mount Without Rigging Frame54
Installation of an Input Board55
Removal of an Input Board57
Software Update58
Lenses61
Lens Installation62
Installing the Lens Safety Cable64
Lens Removal68
UST Lenses70
About UST Lenses70
Installation of the Lens Safety Cable on the UST Lens71
Installing the UST Lens71
Adjustment of the UST Lens72
Change the Motor Block Orientation74
Flight Case and Rigging Frame77
Flight Case78
Rigging Frame79
Pulse SFP Input Use Cases81
Use Case 1: SFP+ Transceiver + Fiber Connection (Integrated or Separated)82
Use Case 2: Neutrik Opticalcon Duo + SFP+ Transceiver + Internal Fiber83
Use Case 3: Neutrik Opticalcon Quad + SFP+ Transceiver + Internal Fiber84
Use Case 4: Loop-Through Mode85
Projector Covers87
Cover Locks88
Removal of the Front, Side and Rear Covers89
Removal of Top Cover90
Installing the Projector Covers91
A Dimensional Drawings93
Dimensions of the Projector94
Dimensions of the Rigging Frame95
Dimensions of the Flight Case96
Glossary97
List of Tools99
Index101

Barco UDM W30 - Flight Case and Rigging Frame

Table of Contents

Other manuals for Barco UDM W30

Related product manuals