R5906112 /09 UDX series 171
10.8 Setting the measurement system
About the measurement systems
You can use this menu to change the default measurement systems. By default the metric system is used. But
you can choose between the following:
• Temperature: °C or °F
• Distance: meter, centimeter, feet or inch.
How to set a different metric system
1. In the main menu, select System Settings → Units.
Image 10-28: System settings menu – Units
The Units menu is displayed.
Image 10-29: Units menu
2. Set the desired Temperature unit and Length unit.
GUI – System Settings
To Next Page
Loading...
