56-101-00901 Revision F Page 2
3. INFORMATION PROVIDED WITH THE TEST SET
In addition to this User Instruction Manual, the Test Set is delivered with the items described below.
A. The Owner's Warranty Registration card (refer to Figure 1), is to be completed by the owner and
returned to Barfield, Inc. within ten (10) days of purchase to ensure automatic update of printed
matter and validation of warranty.
To register your unit, please visit https://www.barfieldinc.com/warranty_registration or scan the
QR code on the supplied Warranty Registration.
Figure 1 Owner Warranty Registration Card
B. Each new or re-certified unit is delivered with a Certificate (not pictured) that shows the date
when the unit was tested by the manufacturer, its serial number and when the next certification
is due. This certificate confirms that the unit performed according to its design specifications.
C. The TT1000A Limited One-Year Warranty can be seen in Figure 2.
4. RECERTIFICATION
The Test Set has a one-year recertification requirement. Maintenance required by this unit must be
performed by qualified technicians in a shop equipped with the necessary tooling and resources.
Contact Barfield for Maintenance and Calibration requirements.
To Next Page
Loading...
