Barko Hydraulics 495B SD - Page 12

Operation and Maintenance ManualLast Updated - 08/31/2016
495B ML TM (S)
12
Hotandpressurizeduidcancausesevereburns.Let
system cool before removing any caps. Then remove
caps slowly.
If this machine is equipped with electric motor driven
Auxiliary Oil Cooler, be sure battery is disconnected be-
fore going near cooler fan. If battery is not disconnect-
ed, fan may come on at any time causing severe injury.
Hot exhaust pipe can cause severe burns. Do not touch
exhaust pipe when hot, or when engine is running.
Useonlyhydraulicuidinhydraulicoilreservoir.
Use only diesel fuel in fuel reservoir.
Otheruidswillcausemachinedamage.
SAFETY SUMMARY CONTINUED...
Improper electrical connections will cause battery explo-
sion, combustion or electrical component damage, and
may result in death or severe injury.
This is a 12 volt negative ground electrical system.
Always wear seat belt when operating or running ma-
chine.
Check the Air Cleaner Assembly daily for cracks, loose
clamps, or any other damage. If debris is able to bypass
the Air Cleaner for any reason, it can damage the en-
gine.
MaintainallcomponentsofMuferAssemblytomeet
noise and exhaust standards.
Improper machine transport can cause death, severe
injury or property damage.
Before transporting:
- Lower and secure boom/attachment to truck/trailer
bed.
- Raise stabilizers.
- Shut down machine to a zero energy state.
Any unauthorized welding, alterations, additions or modi-
cationsmadetoBarkomachinerywillvoidwarranty.
Thismachinewasdesignedtodoaspecicjoband
alterations could result in death, severe injury or property
damage.
If Barko-authorized welding must be done, refer to
service manual for welding proceedure. If procedure is
not followed electrical and structural damage may occur.