Operation and Maintenance ManualLast Updated - 08/31/2016
495B ML TM (S)
6
Raising hydraulic pressure on this
machine above the factory approved
settings may cause death, severe
injury or property damage and will
void the warranty
The consequences of increasing hydraulic pressure are
serious. The function of the relief valves are to provide a
fuse action to protect the machine and the operator from
overloading. When overloaded, the machine can become
stressed to a level where part fractures cause death, se-
vere injury or property damage. This is an extremely
dangerous practice.
Accordingly, you are advised that the pressure settings of
this machine are limited to the factory approved settings.
Pressures in excess of these settings render each and all
Barko warranties null and void and constitute an obvious
misuse and abuse of our product.
Barko Hydraulics, LLC
To Next Page
Loading...
