EasyManua.ls Logo

Barko Hydraulics 495B SD - Page 96

Default Icon
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation and Maintenance ManualLast Updated - 08/31/2016
495B ML TM (S)
96
REMEDY
PROBLEM CAUSE
Engine cranks but will not start or
starts hard.
Fuel tank empty.
Water in fuel or water frozen in
fuel lines. Water frozen in fuel
lter.
Debris or dirt in fuel.
Airlterelementrestrictedwith
dirt, snow, or water.
Check fuel level. Fill as
necessary.
Thaw and /or drain water from
fuel tank. Thaw ice in fuel lines
anddrain.Installnewfuellter.
Drainandushfuelsystem.
Changefuellter.
Cleanorreplacelterelements.
Clean air intake pipe screen.
Low engine oil pressure.
Low engine oil level.
Low viscosity - (using too light of
oil in summer.)
Check engine oil level. Fill to
correct level. Check for and
repair, any leaks.
Drainengineoilandllwith
heavier weight engine oil.
Engine overheats.
Low coolant level.
Loose, worn, or broken fan belt.
Radiator plugged.
Airlterelementsplugged.
Fill to correct level and check for
leaks.
Tighten or replace belt.
Clean and inspect radiator.
Clean or replace elements.
Engine will not start.
Low or discharged battery.
Recharge battery.
ENGINE
TROUBLE SHOOTING
Usethissectiononlyasageneralguidetondingsolutionsformachineproblems.
Ifthemachineshouldmalfunction,ndtheproblemintheheadingslistedthenrefertothepossiblecausesand
remedies listed with the problem.
The list of problems, causes, and remedies will only give an indication of where a possible problem can be and what
repairs are needed.
More, or other, possible servicing may be needed beyond the recommendations in the list or a factory service man
may be required.

Related product manuals