Barko 595B - Page 15

10-11
®
SAFETY SUMMARY (continued...)
*** LEXAN WINDSHIELD DAMAGE HAZARD ***
Ÿ Cleaning solutions will scratch and damage Lexan
windshields.
Ÿ Clean Lexan windshields with water only.
Always wear seat belt when operating or running
machine.
Remember to buckle up!
Improper electrical connections will cause battery
explosion, combustion or electrical component
damage, and may result in death or severe injury.
Voltages vary per model. Know your machine.
Hot and pressurized fluid can cause severe burns.
Le
t system cool before removing any caps, then remove
caps slowly.
Any unauthorized welding, alterations, additions or
modifications made to Barko machinery will void
warranty. This machine was designed to do a specific job
and alterations could result in death, severe injury or
property damage.
Improper machine transport can cause death, severe
injury or property damage.
Before transporting:
Ÿ Lower and secure boom/attachment to truck/trailer bed.
Ÿ Raise stabilizers.
Ÿ Shut down machine to a zero energy state.
Check the Air Cleaner Assembly daily for cracks,
loose clamps, or any other damage. If debris is able to
bypass the Air Cleaner for any reason, it can damage the
engine.
If this machine is equipped with electric motor driven
Auxiliary Oil Cooler, be sure battery is disconnected
before going near cooler fan. If battery is not
disconnected, fan may come on at any time causing
severe injury.
Maintain all components of Muffler Assembly t
o
meet noise and exhaust standards.
Hot exhaust pipe can cause severe burns. Do not
touch exhaust pipe when hot or when engine is running.
CAUTION
!
CAUTION
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
NOTICE
DANGER
!
07/12/2018
Updated
OPERATOR’S