Barko 595B - Page 31

13-9
®
INSPECT & SERVICE SCHEDULE (continued...)
Reservoirs & Fitting- check
for leaks
X
Hydraulic Oil- check level,
visually inspect oil quality
X
Hydraulic Tank Breather-
inspect
X
replace if defective
Hydraulic Oil Filters &
Elements- replace
X X
replace after first 100 hrs and
every 500 hrs thereafter
Hydraulic Oil-
change
X
Hydraulic Tank Breather-
replace
X X
whichever comes first
80 Options
70
Reservoir-
Hydraulic &
Fuel
All Componets- check of
wear, leaks, loose fittings,
etc.
X
Final Drive Mounting Bolts-
check torque
X
check after initial 50 hours
Final Drive Gear Oil- check
level
X
add fluid if necessary
Final Drive Gear Oil-
change
X X X
change every 300-1000 hours
for conventional oil, 1000-200
0
hours for synthetic
All Components- clean and
inspect
X
Batteries- check, secure and
clean
X
Gull Wing Door Pump
Reservoir- check oil level
X
add fluid if necessary
50 Shrouding
46 Lower Frame
***see Side Frame Service Section in Chapter 46 for ALL inspection and service information***
Daily 50 Hours 100 Hours 500 Hours 1000 Hours 2000 Hours 4500 Hours 5000 Hours Yearly 2 Years 3 Years 4 Years
INTERVAL
NOTES /
INSTRUCTIONS
CHAPTER REF
LOCATION
/ SYSTEM
INSPECTION &
SERVICE REQUIRED
07/26/2018
Updated
OPERATOR’S