4) Operation List
4.1 Video/Photo Playback
Turn “Power Switch” to SETUP position to enter test mode. Press the “↑”
arrow button to view files on SD card, press the “←” and “→” buttons to
navigate, and press “OK” to play a selected video.
.
4.2 Delete
4.3 Format of SD Card
Formatting your SD card will delete all files from the SD card. Perform this
operation if your SD card is not working correctly.
4.4 Auto Power Off
In the Setup position, the camera will automatically power off in 3 mins if no
keypad buttons are pressed.
Barn Owl Tech, Inc 12
The camera is pre-configured for motion triggered photos. To use
basic motion triggered photos, move the power switch Switch to
ON. The screen will not come on, but you will see the red LED in
the front of the camera flash. The camera can now be mounted if
motion-activated photos are desired. Refer to page 6 below for
default settings in red letters.
Press the “↑” button again to exit the SD card navigation menu.
deletes selected photo/video. Press “OK” to choose,
press“↑” and “↓”for selection, “Yes” to confirm, “No” to
exit to the previous page
deletes selected photo/video. Press “OK” to choose,
press“↑” and “↓”for selection, “Yes” to confirm, “No” to
exit to the previous page
To Next Page
Loading...