To Next PageTo Next Page
Need help?Do you have a question about the Barreto 13STKH and is the answer not in the manual?
Engine Specifications| engine | Vanguard™ 16.0 Gross Hp |
|---|---|
| power | 16 hp at 3600 RPM |
| fuel | Gasoline |
| fuel capacity | 18.9 liters |
| oil capacity | 1.4 liters |
Weight and Dimensions| GVWR | 490 kg |
|---|---|
| width | 0.89 m |
| length | 2.06 m |
Engine Specifications| engine | Honda GX390 |
|---|---|
| power | 11.7 hp @ 3600 RPM |
| fuel | Gasoline |
| fuel capacity | 6.1 liters |
| oil capacity | 1.1 liters |
Weight and Dimensions| GVWR | 490 kg |
|---|---|
| width | 0.85 m |
| length | 2.06 m |
Provides emergency contact numbers for USA, Canada, and other regions.
Emphasizes understanding all safety points and checking guards/decals.
Covers understanding the machine's capabilities and all operational controls.
Includes knowledge of loading, securing, trenching, and lubrication.
Information on where to purchase replacement trencher and engine parts.
Instructions for cleaning, replacing, and applying decals to the machine.
Guidelines for recycling or disposing of oil, fuel, and batteries according to regulations.
Details on oil type, capacity, level checking, and replacement intervals.
Explains the function of the hour meter and how to reset service intervals.
Details on greasing intervals and identifies specific lubrication points on the STK.
Instructions on how to check and adjust the tension of the dig chain.
Procedure for measuring and verifying correct track tension.
Step-by-step guide to adjusting track tension using the tension adjusting bolt.
Instructions for removing and installing the machine's tracks.
Provides critical first aid information for eye, skin, inhalation, and ingestion contact with battery acid.
Lists emergency and medical contact numbers relevant to battery handling incidents.
Step-by-step instructions for safely removing the battery from the STK.
Step-by-step instructions for safely installing the battery onto the STK.
Guidance on cleaning battery terminals and components using a baking soda solution.
Troubleshooting steps for when the entire hydraulic system is inoperative.
Troubleshooting steps for when the engine stalls or loses power.
Troubleshooting steps for when the dig chain does not rotate but track drive functions.
Troubleshooting steps for when tracks do not turn but the chain rotates.
Identifies common causes and solutions for hydraulic fluid leaks.
Addresses potential causes for foaming hydraulic fluid.
Troubleshooting steps for issues with the boom lifting or lowering.
Provides detailed specifications for the E13STKH and E16STKB models and their engines.
