EasyManua.ls Logo

Barska AX11652 User Manual

Barska AX11652
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
3/13
BC282
Users Manual for Biometric Safe
GETTING STARTED
1. Remove Emergency Keys from accessory package
2. To expose the Emergency Key access, remove Logo Plate
(G) screws with provided tool
3. Insert Emergency Key into key access, push and turn
counter-clockwise
4. Turn Handle (H) clockwise to open the safe
5. Continue with INSTALL BATTERIES
INSTALL BATTERIES
1. Remove Battery Compartment (B) cover
2. Insert 4 AA batteries and restore battery cover
3. Continue with FINGERPRITN REGISTRATION
FINGERPRINT REGISTRATION
IMPORTANT: The safe is in either Pre-registered mode or
Factory Default mode, test safe to determine factory settings
below
Pre-registered mode: Safe can NOT be opened with any
fingerprint(s)
Factory Default mode: Safe can be opened with ANY
fingerprint(s)
1. With the safe door open, press and release Initialization
Button (A)
2. Immediately place a finger on the Fingerprint Scanner (D)
- Hold finger still
- 1 beep will be heard recognizing the fingerprint; followed by
2 consecutive beeps
- Remove finger
- Registration is complete
Successful Registration
Registration is successful when a total of 3 beeps are heard
Unsuccessful Registration
2 short beeps will be heard; repeat registration process again
3. To register another fingerprint - repeat steps 1 – 2
4. Continue with TEST (NON) REGISTERED FINGERPRINTS
TEST (NON) REGISTERED FINGERPRINTS
1. Test multiple Non-Registered fingerprints
- Close safe door, turn Handle (H) counter-clockwise to
lock the safe
- Press and release Wake-Up Button (F)
- Place a non-registered finger on the Fingerprint Scanner (D)
- Turn Handle (H) clockwise, the door should not open
- If the door opens with a non-registered fingerprint,
registration was unsuccessful; the safe is still in Factory
Default mode
- Repeat steps under FINGERPRINT REGISTRATION, and
test multiple non-registered fingerprints
2. Test a Registered fingerprint
- With door closed, press and release Wake-Up Button (F)
- Place a registered finger on the Fingerprint Scanner (D)
- Turn Handle (H) clockwise, the door should open
- Registration was successful, if it only opened with registered
fingerprint(s)
CLOSE/OPEN SAFE DOOR
CLOSE: Close safe door, turn Handle (H) counter-clockwise to
lock the safe
OPEN: Press and release Wake-Up Button (F)
- Place a registered finger on Fingerprint Scanner (D)
- Turn Handle (H) clockwise to open the safe
WARNING
- New Safe is in either Pre-registered mode or Factory
Default mode; ANY fingerprint can open the safe. Only
a successfully registered Fingerprint(s) can terminate
Factory Default mode.
- Register at least two different fingerprints and test a
few times before closing the safe door.
- Test with a non-registered fingerprint. If the safe
opens, the safe is still in Factory Default mode.
- Avoid leaving safe door open and unattended; it will
allow unauthorized individuals to add their fingerprints
and/or reprogram the safe, gaining full access to the
safe and the contents.
- Test the Emergency Keys and store them in a secure
place, NOT inside of the safe.
- To maximize the security and performance of the
safe, test registered fingerprints every 6 months.
- Initialization button cover must be restored after
every use.
- If user resets the safe to Factory Default mode: ANY
fingerprint can open the safe.
- Test and make sure the safe works properly
before mounting.
- Mount the safe before use because the safe has a
small base with a heavy door, and will tip forward if not
properly mounted.
- Keep children away from safe; they should not play
with or around the safe at anytime. Children at play
could accidentally get locked inside the safe or
accidentally pull on the safe door causing safe to tip
over if not properly mounted.
- Failure to follow these warnings could result in serious
injury or death.
Read all instructions before using this safe.
* Actual model may vary
A. Initialization Button
B. Battery Compartment
C. Bolts
D. Fingerprint Scanner
E. Indicator Lights
F. Wake-Up Button
G. Logo Plate and Emergency
Key Access
H. Handle
I. External Battery Pack
(batteries not included)
J. External Battery Access
A
B
C
F
D
E
G
HH
HJ
I
L
o
c
k
U
n
l
o
c
k
Question and Answer IconNeed help?

Do you have a question about the Barska AX11652 and is the answer not in the manual?

Barska AX11652 Specifications

General IconGeneral
BrandBarska
ModelAX11652
CategorySafes
LanguageEnglish

Summary

Warning and Safe Operation

Initial Safe State and Fingerprint Registration

New safes are in Pre-registered or Factory Default mode. Any fingerprint can open the safe in Factory Default mode.

Safe Operation Precautions

Avoid leaving the door open unattended. Test emergency keys and store them securely. Test registered fingerprints every 6 months.

Mounting and Child Safety

Mount the safe securely to prevent tipping. Keep children away from the safe to prevent accidents or entrapment.

Getting Started and Initial Setup

Initial Access Procedure

Steps to expose and use the emergency key access and open the safe.

Battery Installation

Instructions for installing batteries into the battery compartment.

Fingerprint and Test Procedures

Fingerprint Registration Process

Steps to register fingerprints, including confirmation of successful registration.

Testing Non-Registered Fingerprints

Verify the safe is not opening with un-registered fingerprints.

Testing Registered Fingerprints

Verify the safe opens only with registered fingerprints.

Safe Door Operation

Instructions for closing and opening the safe door using the handle.

Advanced Safe Functions

Beep Sound Options

How to turn the beep sounds on or off for the safe.

Opening with Emergency Key

Procedure to open the safe using the emergency key.

Opening with External Battery Pack

Instructions for opening the safe when internal batteries are low.

Resetting to Factory Default

Steps to delete all stored fingerprints and reset the safe to factory default mode.

Low Battery Warning

How to recognize and respond to low battery indicators.

Care, Maintenance, and Mounting

Care and Maintenance

Guidelines for cleaning the fingerprint scanner and general safe care.

Wall Mounting Instructions

Detailed steps for securely mounting the safe to a wall.

Floor Mounting Instructions

Instructions for securely mounting the safe to a floor.

Related product manuals