ex
1 About this documentation
Subject to technical modifications
Revision A / 04/2019
9 / 106
1.2.2 Symbols and means of presentation
Table 2 Symbols and means of presentation
1.2.3 Explanation of terms
Some abbreviations are used in the documentation.
IS - Intrinsically Safe is used as an umbrella term for the Zone 1 and Division 1 versions.
NI - Non Incendive is used as an umbrella term for Zone 2 and Division 2.
BCS 3600
ex
- stands for the entire explosion-protected product range.
1.3 Technical changes
The current versions of data sheets, operating instructions, certificates, EU declarations of conformity
and information about new accessories can be downloaded from www.bartec.com under “Products” in
the “Automation & Enterprise Mobility ” product area or can be requested directly from BARTEC GmbH
(see Chapter 1.5).
Please find further Service and Support download information on
http://automation.bartec.de/indexE.htm
1.4 Languages
The original User Manual was drawn up in German. All other available languages are translations of
the original User Manual.
The User Manual is available in German, English and French. If other languages are required, these
should be requested from BARTEC or specified when placing the order.
Important advice and information for the effective, efficient and environmentally
sound use of the product.
Condition that must be met before the subsequent actions can be performed.
Individual steps you must take.
1., 2., … Various steps to be performed in the order specified.
Indication of the results of a step or of several steps for monitoring success.
To Next Page
Loading...
Need help?
General
