Baruffaldi CE 13 - Delivery Conditions

USE AND MAINTENANCE MANUAL
2-Speed Gearboxes Series CE
M.CE.GEN.ENG.DOCX
Issued
2018
Rev.03
Page 7 / 59
All Gearboxes are delivered with:
• Test report
• Electrical connector (a) complete with plug and relevant pins
• Balancing insert (b) for motor shaft balancing (if necessary)
• Oil level sensor (c) (on request)
Additional components only for Gearboxes type CE 12-14-15
• Pinion (d) according to the ordered motor, with o-ring and screw
• Only for some motors, spacer (17), to be inserted in the pinion
1.1 DELIVERY CONDITIONS
+
(a)
(b)
(c)
Spacer (17)
+
(d)