EasyManua.ls Logo

Baselier FA W Series - Safety Labels Explained and Position on the Machine

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FA-(B)W EN 8
SAFETY LABELS EXPLAINED
1.
Attention!
Read instruction book before operating or performing
maintenance on the machine.
Read also the safety instructions before using the machine.
2.
Attention!
Stop tractor, remove ignition key and read instructions before
carrying out any maintenance, cleaning or servicing.
3.
Attention!
Stay clear to the PTO shaft when the tractor engine is running.
The rotating parts can grab clothing, hands, hair etc. and sweep away
with serious consequences.
Replace protections in case of damage directly.
4.
Attention!
Danger when the rotor shaft is running.
Stay away with hands when the rotor shaft is running.
Follow this procedure:
1. Switch off PTO shaft from tractor.
2. Wait until the rotor shaft complely stopped.
3. Lift the machine with the 3 point linkage.
5.
Attention!
Stay clear of 3 point linkage when the machine is running.
Between the tractor and machine there is danger for personal
injury.
Don’t operate the 3 point linkage between the tractor and machine.
6.
Attention!
Stay clear of at least 5 meter on both sides of a working or lower
down machine to the ground.
Do not attempt any adjustments when the machine is running.
7.
Attention!
Danger of flying around of stones or clods.
Keep onlookers and bystanders at a safe distance from the
machine while it is in operation.
Keep minimal 20 meters distance at the front and rear side of the
machine when the rotor shaft is running.
This count especially when starting the ridge building.
8.
Document holder instruction manual