Basic American ZENITH Series - Bed Operations - Trendelenberg;Reverse Trendelenberg

ZENITH SERIES
75(1'(/(1%(5*
)227
(1'
5(9(56(75(1'(/(1%(5*
+($'
(1'
)227
(1'
+($'
(1'
BED OPERATIONS - TRENDELENBERG/REVERSE TRENDELENBERG
1. Make sure the HI/LO function on the staff
control panel is not locked out (orange
lock icon). To unlock, press the Key icon #1
and HI/LO Locked button #2 at the same
time.
2. To move the bed to the Trendelenberg
position (foot end up), press on button #3.
3. To move the APS bed into the Reverse
Trendelenberg position (head end up),
press on button #4.
1 2 3
4
NOTE: THE TRENDELENBERG AND REVERSE
TRENDELENBERG FEATURE CAN ONLY BE
ACCESSED USING THE STAFF CONTROL. IT
CANNOT
BE ACCESSED USING THE HAND
CONTROLLER/PENDANT.
GF Health Products, Inc. - www.grahamfield.com Zenith Series Service Manual 999-0831-190C DEC. 2013
18